♟️ Dji Phantom 2 Camera Not Working

No video or camera control on Phantom 4 Pro. 2#. My Phantom 4 Pro has been having video signal problems for the past month. It started with flickering and time lag, and now the video only shows static snow. This is happening in many different places, and I’m sure the most recent ones were free from any radio signal interference. But I'm not sure that is really what is needed given the problem I'm experiencing. I have the current firmware loaded in the Phantom using the Phantom 2 Vision+ Assistant Software v3.8. The P2V+ flies just fine, with or without the camera on it. But the camera will not link up with my iPhone. Any ideas? I updated my Phantom 2 vision plus with the latest firmware updates from the 3.8 software assistant, RC assistant and FC200 update, and now the gimbal is making the camera look straight ahead, then down over and over again by itself and I have no control to stop it. The camera is also unable to connect to the vision app. I followed all the update directions perfectly, and tried calibrating the Take out the SD card, then turn off everything. Leave the card OUT and start up the phantom and the controller and your device. See if that fixes the "disconnected" issue. It did for me. Everything worked after I did this, so it absolutely has to be the DJI software trashing the card during a firmware update. 3#. Download DJI Assistant 2 from Here and fully install on your PC (or MAC, but PC seems less problematic). Connect aircraft to computer (and power up) using USB, then run DJI Assistant 2. This will allow you to upgrade/refresh or do a factory reset on the aircrafts firmware. This may help to resolve this problem. 1) Turn on range extender only. 2) Wait 30-40 secs. 3) Turn on controller and then turn on Phantom. 4) Wait 30 secs. 5) Boot up your mobile device. Wait an additional 30 secs or so while the device boots up. 6) Sign on or swipe or whatever to get to the main screen of your mobile device. The Phantom 2 uses a 2.4 GHz remote controller and does not include a camera. A Zenmuse camera gimbal could be purchased additionally with the Phantom 2 or could be purchased later. The Zenmuse camera gimbal was designed to hold cameras like the GoPro. The Phantom 2 includes an automatic return-to-home feature, increased maximum flight speed 3. Press and hold the image transmission screen on the DJI GO 4/GO app. After a blue circle appears, drag it up or down to control the gimbal. If the gimbal moves accordingly, the gimbal can work normally. 4. Tap “Advanced Settings” under “Gimbal Settings”. Check whether “Max Gimbal Pitch Speed” is set to 1. All of a sudden my camera won't tilt any longer. Seems as though it started around the app update for vision +. I have emailed DJI but have only received an automated response. I have the standard phantom 2 vision. My FPV started freezing up as well. Any help would be greatly appreciated. Jun 9, 2017. #2. The ribbon cable controls the gimbal motors. The silver cable is for the camera. If you still do not have gimbal movement, the ribbon cable could be the culprit. Did you use a a genuine DJI ribbon cable? After market ones are worthless in my opinion due to how faulty they can be. 1#. Normally i connect wifi between my phone with camera. But now i dont connect, check bind on dji app see: wifi repeater connection failed. So i check wifi extender is power is strong, but system is not blind. Signal is fix. So that the wifi extender have problem. It not work. The Phantom 4 drone itself looks and feels like a high quality product. The blades attach quickly and easily, and the drone body feels like it could take a bump or two and remain unscathed. The camera and gimble are obviously more fragile, and require a protective guard to be used when transporting the drone. d8iVY.

dji phantom 2 camera not working